ASME B18.2.3.5M-1979 Metric hex bolts
|
ID： |
41A756F8AD134483A31EFF1FB6740302 |
|
文件大小(MB)： |
0.66 |
|
页数： |
22 |
|
文件格式： |
|
|
日期： |
2008-4-6 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
工ND-STD ANSI -炉丒 00012b7 q , 夕,ANSI B18.2.3.6M-79,26 APRIL 1979,ACCEPTANCE NOTICE,This non-Govemment document was adopted on 26 April )979 and is approved for use by the DoD,and Federal Agencies. Metric hex bolts shall conform to this document and Appendix III, which establishes,standard items for Government application. Appendix HI, Table 4 shall be used for item selection in,accordance with the part numbering system and size information contained therein. The indicated industry,group has furnished the clearances required by existing regulations. Copies of the document are stocked by,DoD Single Stock Point, Naval Publications and Forms Center, Philadelphia, PA?19120, for issue to DoD,activities and Federal Agencies only. Contractors and industry groups must obtain copies directly from:,The American Society of Mechanical Engineers,United Engineering Center, 345 E. 47th Street,New York, NY 10017 or,The American National Standards Institute,1430 Broadway, New York, NY 10018,Title of Document：,ANSI Document No.:,Bolt, Hex - Metric,ANSI B18.2.3.5M-1979,Date of Specific Issue Adopted：,Releasing Industry Group：,Custodians：,Army - AR,Navy — AS,Air Force - 99,Review Activities:,Army 一 AV, MI, ER,Navy - MC,DLA- IS,NSA - NS,Civil Agencies:,GSA-FSS,26 April J 979,The American Society of Mechanical Engineers,Military Coordinating Activity,Army - AR,(Project 5306-0620),User Activities:,Army - ME, AT,Navy - SH,NOTICE: When reaffirmation, amendment, revision, or cancellation of this standard is initially proposed,the industry group responsible for this standard shall inform the Military Coordinating Activity of the,proposed action and request their participation.,FSC 5306,No part of this document may be reproduced in any form, in an electronic,retrieval system or otherwise, without the prior written permission of the,publisher.,Date of Issuance： August 31, 1979,Copyright . 1979 by,THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS,AU Rights Reserved,Printed in U.S.A.,THIS DOCUMENT CONTAIHS _PAGES.,Copyrighl ASME Irlwnafioc^l,Prrw dud t>y IMS wttb. ,ASHE Bia.2.3.511 ” ■ OVS^bVO 00H3103 1,ERRATA,to,ANSI B18.2.3.6M-1979,METRIC HEX BOLTS,Page 3, Note change Bl.13 to read B1.13M,Page 5, in the standard shall be replaced with the,second page of this errata,Page 10, MATERIAL AND FINISH CODE, change to,read:,A — Steel w/Cadmium Plating per QQ-P-416,Type II, Class 3 Plating.Thickness),Property Class 109.,B - Steel w/Zinc Plating per QQ Z-325, Type II,Class 3 (5.1gm Plating Thickness), Property,Class 10.9.,THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS,345 East 47 Street, New York, N.Y, 10017,CmEoN AWE i,N。nr n?^?c?Jur>0 psriWfled wthwZ ksw frtirtl IHS,ASHE Blfl.e.3.5H 7^ ■ OTSHLVO 00M310M 3 .,)\i\q,AMERICAN NATIONAL STANDARD,Metric Hex Bolts,ANSI B18.2.3.5M - 1979 Government Key Words:,Bolt, Hex-Metric,SECRETARIAT,SOCIETY OF AUTOMOTIVE ENGINEERS,TH6 AMERICAN SOCIETY OF MECHANICAL ENGINEERS,PUBLISHED BY,THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS,United Engineering Center 345 East 47th Street New York, N. Y. 1 0017,jya?i liMr.3 — ~ -s PROBLEM HARD COPY,ASHE B16.2.3.5M 75 , OVS^bVO 00M3105 S,ANSI B18.2 3.5M 79,26 APRIL 1979,ACCEPTANCE NOTICE,This non-Govemment document was adopted on 26 April 1979 and is approved for use hy the DoD,and Federal Agencies. Metric hex bolts shall conform to this document and Appendix 111, which establishes,standard items for Government application. Appendix III, Table 4 shall be used for item selection in,accordance with the part numbering system and size information contained therein. Tlie indicated industry,group has furnished the clearances required by existing regulations. Copies of the document are stocked by,DoD Single Stock Point, Naval Publications and Forms Center, Philadelphia, PA, 19120, for issue to DoD,activities and Federal Agencies only. Contractors and industry groups must obtain copies directly from：,The American Society of Mechanical Engineers,United Engineering Center, 345 E. 47th Street,New York, NY 10017 or,The American National Standards Institute,1430 Broadway, New York, NY 10018,Title of Document:,ANSI Document No.:,Date of Specific Issue Adopted:,Releasing Industry Group:,Custodians:,Army - AR,Navy — AS,Air Force - 99,Review Activities:,Army - AV, MI, ER,Navy - MC,DLA- IS,NSA 一 NS,Civil Agencies:,GSA-FSS,Bolt, Hex — Metric,ANSJB18.2.3.5M-1979,26 April 1979,The American Society of Mechanical Engineers,Military Coordinating Activity,Army — AR,(Project 5306-0620),User Activities:,Army - ME, AT,Navy — SB,NOTICE: When reaffirmation, amendment, revision, or cancellation of this standard is initially proposed,the industry group responsible for this standard s……
……